Search This Blog

Thursday, April 24, 2014

Ultimate Ears UE900: Take two


Since my review in 2012, there has been a rumor that Logitech have tinkered the internal configuration of UE900, thus nullifying the result of my analysis. In order to figure out what the hell is going on with Logitech, I bought a brand new pair of UE900 at my own expense.






PRO: Please refer to my previous analysis in 2012.

CON: Please refer to my previous analysis in 2012.

ON SECOND THOUGHT #1: Yes, UE900 from 2014 outputs a lot more mid to high range response compared to the 2012 one.


While such change does slightly better treble in stock configuration, it has a drastic impact on my "recommendation". No, UE900 with a 100 ohm resistor doesn't sound as linear as it used to be.

ON SECOND THOUGHT #2: As far as insertion depth goes, please refer to my previous analysis in 2012.

ON SECOND THOUGHT #3: While everything else remains the same as the 2012 analysis, the resonance at 8 kHz(λ/4 resonance of the tweeter) is heavily emphasized with added resistance. The treble response is not at linear, and requires extra amount of effort to tone the peak down.


ON SECOND THOUGHT #4: Even with different kind of acoustic dampers, the problematic resonance still persists. And please note that UE900's stock damper is located in the middle of the bore, so extra care is required when removing it. (If your UE900 comes with a pair of white dampers, you should definitely have a real problem with the annoying peak at 8 kHz as can be seen here)

ON SECOND THOGHT #5: As far as the working principle of the pinhole bore goes, please refer to my previous analysis in 2012.

ON SECOND THOUGHT #6: Since the previous modification method doesn't work anymore, here's something different: First, block the pinhole bore and puncture a smaller hole with a needle. Second, remove the stock damper, insert a piece of earbud foam(1 mm X 1 mm X 1 mm) to the far end of the bore, and equip a 2200 Ω red damper(the stock damper may be reused) on top of the foam. Make sure the red damper is situated in the middle(stock location) of the bore. Finally, a pair of Sony MH1 sleeves(also compatible with Sony hybrids / Phonak stock / Shure EA510) are needed to fine-shape the frequency response above 10 kHz.


Users may add extra resistance, perhaps a 33 Ω resistor, to further make the sound flatter. This time, UE900's reference target is Sony MDR-EX1000 without the peak at 5.5 kHz, but with extended treble, and the result is stunningly good.

ON SECOND THOUGHT #7: While in stock configuration, UE900 of 2014 doesn't even closely match any reference targets.

IN CONCLUSION: This is headphone modders' worst nightmare come true, and I have absolutely no clue why Logitech have made such decision. UE900 can still be nicely tuned, but it turns out to be way more difficult than how it used to be.

6 comments:

  1. That's not the new model unless you're still using old pictures...

    ReplyDelete
  2. What do you think of this method for ue900 white filter version?
    (http://m.egloos.zum.com/ilyub/v/5808422)
    Is that valid method?

    ReplyDelete
  3. Sir, thank you for what you do :3

    I am wondering if I might me ignorant about something--you seem to have a lot of interest in manipulating the frequency response of transducers via IEM insertion depth, and by means of changing the impedance (I might be stating that wrong), asides from possibly raising the distortion when boosting frequencies that a transducer has trouble reproducing, are there any other technical drawbacks from running digital music through an equalizer app?

    Again, it is great that you put the information out that you do--thank you.

    ReplyDelete
  4. Nice Website...
    Hey JOIN now fblikesbot.com and Increase Facebook Likes your profile and websites.
    Increase Facebook Likes and check your website worth worth my websites
    FB Likes and check your website worth Website Value Calculator
    Hot Wallpapers seo tools website
    its may be very beneficial for you also really

    ReplyDelete
  5. Earphones with mic are an essential and vital mobile accessory. Whether you use it to listen to music or just to receive calls, headphones made of high quality material make it easy for you. Headphones are also not just about being convenient but also about high sound clarity. If you are thinking of getting a good quality headphone, then look no further than LatestOne. LatestOne offers the best mobile accessories with the best deals.

    ReplyDelete
  6. Hi Dear,

    i Like Your Blog Very Much..I see Daily Your Blog ,is A Very Usefull For me.

    You Can see Graphene Earbuds, Triple Drivers, special earbuds.

    Our company, Grande Technology Co., Ltd. was founded by several music lovers and sound engineers. Our company is established in 2007, and AUDBOS is our brand. We strive hard to achieve excellence, specialize in creating better quality. AUDBOS headphone provides better sound than other similar products. We are not afraid of challenges of innovation; we are in pursuit of customers’ expectation of sounds. Working beyond customers’ imagination is our goal, and constantly self-transcendence. To bring customers better quality of sounds than you expected. AUDBOS is always good sound.Get the best sound and invest in our range of in special earbuds, the highest quality at the lowest prices only at audbos.com.

    Visit Now - special earbuds





    ReplyDelete